How to Install Allure Vinyl Flooring
For those who are having trouble to install the allure vinyl flooring as a DIY project you are doing for the weekend, it is a good time for you to stop worrying about such a matter since I am going to show a few useful tips when installing the allure vinyl flooring. So you should not go anywhere far from this post to know what you are going to do when installing that kind of flooring to enhance the overall visual appearance of your house. So, are you ready to know all the information you need right at the moment?
Before starting the project, take out the tape measure and use it to measure the intended floor where the installation takes place. In order to define the square footage, you have to multiply the length and width of the space to determine square footage. Do not forget to add ten percent from the result so you could cover the cutting and installation mistakes. Yet, the future repairs and maintenance may require extra material. Go to the Home Depot or any store in order to buy the material. Give a bit more time for the vinyl flooring to adjust itself before the installation for at least 48 hours. Here, the flooring will acclimate to the room’s temperature and humidity levels. Try to leave a bit gap during the installation and you could place the first row of vinyl on the floor. Then, the second row of the flooring should be connected. You could use a utility knife as well as a straight edge to cut the planks. It is possible for you to cut on a hard and flat surface, but make sure you are not using the already placed vinyl to cut things.
Complete things up by installing the base and the job is considered to be done at the moment.